Channel Title: Carbon Workshop Channel Description: Here you'll find the best video tutorials for beginner and advance composites!! https://www.youtube.com/channel/UCM5RXSAAbRfyYvoMDB6F1Jg?sub_confirmation=1 I started this channel to share my passion of composites by uploading videos of what goes into making some quality 100% real carbon fibre products. Everything iv learnt has just been through trial and error as a hobbie in my back garden! Along with mould making, resin infusion, prepreg carbon fibre, hand layup carbon fibre, 2k clear coat. Sharing tips and tricks along the way. Enquiries - Carbonworkshops@gmail.com <video> How to make REAL Carbon Fibre (Fiber) fog light surrounds. Description: How to make REAL Carbon Fibre fog light surrounds. This video shows the process used to make these carbon fibre fog light surrounds for the Renault Clio Sport 172/182 Products i used in this video in this step by step tutorial are - Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Release Film https://www.easycomposites.co.uk/r210-unperforated-release-film Breather Cloth https://www.easycomposites.co.uk/r210-unperforated-release-film The vacuum bags are food grade boil bags that i get from a friend. And sealed using a standard heat sealing machine. Clear coat used is lechler macrofan hs 2000 These moulds have been made from tooling prepreg, very light and strong moulds. I will make a video soon showing how i made them. For now want to see a more detailed video about a different mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g Camera used is GoPro Hero 8 #prepreg #renault #carbonfibre Carbonworkshops@gmail.com </video> <video> COOK Stickers in CARBON FIBER mould to 120 Degrees C [PREPREG CARBON FIBRE] How To Make Carbon Fibre Description: COOK Stickers in CARBON FIBER mould to 120 Degrees C [PREPREG CARBON FIBRE] How To Make Carbon Fibre After years of stress clear coating over of decals I decided to try curing in mould, which results in a perfect flat finish. Using out of autoclave prepreg carbon fiber with epoxy high temperature mould. 00:00 Intro 00:35 Start of layup 00:50 Applying vinyl sticker 04:07 De Mould 06:10 Finished product **Products I used in this video** Stickers are cut from Oracal 651 vinyl Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Want to see a more detailed video about the mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g #prepreg #mouldmaking #carbonfibre Carbonworkshops@gmail.com </video> <video> How To Repair Damaged Carbon Fibre Mould to New PERFECT Mould. [CARBON FIBER REPAIR] Description: How to repair Damaged Carbon Fibre (Fiber) Mould to New PERFECT Mould [CARBON FIBER REPAIR] One of my old mould which was made from Epoxy Eg160 system started to show signs of stress with cracks and chips, now is time to re make the mould before the mould if ruined and its to late! This mould will still need to be post cured to the temperature needed, in my case 125 deg c. I will use this mould in out of autoclave prepreg Products used in this video - Aluminium powder (added to the pink gel coat) https://www.easycomposites.co.uk/aluminium-tryhydroxide-filler-powder Gel Coat https://www.ecfibreglasssupplies.co.uk/polyester-gel-coat-bs-112-arctic-blue-sb-1180 Coupling Coat https://www.easycomposites.co.uk/uni-mould-vinylester-coupling-coat Tooling Resin https://www.easycomposites.co.uk/uni-mould-polyester-tooling-resin Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Tooling Gel Coat https://www.ecfibreglasssupplies.co.uk/tooling-gelcoat-14-pa-green #repair #mouldmaking #carbonfibre Carbonworkshops@gmail.com </video> <video> How To Make a Sheet of Carbon Fibre. Resin Infusion. TUTORIAL Description: How To Make Carbon Fiber Sheet. Resin Infusion In this video i make a sheet of carbon fibre using resin infusion method. super strong! In my next video i turn this sheet of carbon into something very speical! Materials used in this video - Carbon Fibre https://www.easycomposites.co.uk/650g-22-twill-12k-carbon-fibre-cloth Sealant Tape https://www.easycomposites.co.uk/vacuum-bagging-sealant-tape Bagging Film https://www.easycomposites.co.uk/vb160-vacuum-bagging-film Infusion Resin https://www.easycomposites.co.uk/in2-epoxy-infusion-resin Peel Ply https://www.easycomposites.co.uk/pp180-peel-ply Mesh https://www.easycomposites.co.uk/fm100-resin-infusion-mesh Hose https://www.easycomposites.co.uk/6mm-pvc-vacuum-hose #carbonfiber #sheet #epoxy </video> <video> How to make a Carbon Fibre cover using resin infusion. EPOXY Description: How to make a Carbon Fibre FIBER cover using resin infusion. EPOXY In this video I make a cover to protect a rear arch on a car made from carbon fibre using resin infusion method. super strong! Materials used in this video - Carbon Fibre https://www.easycomposites.co.uk/650g-22-twill-12k-carbon-fibre-cloth Sealant Tape https://www.easycomposites.co.uk/vacuum-bagging-sealant-tape Bagging Film https://www.easycomposites.co.uk/vb160-vacuum-bagging-film Infusion Resin https://www.easycomposites.co.uk/in2-epoxy-infusion-resin Infuply https://www.ecfibreglasssupplies.co.uk/infuply-2 Hose https://www.easycomposites.co.uk/6mm-pvc-vacuum-hose #carbonfiber #carparts #howto </video> <video> 100% Real Carbon Fibre (Fiber) Door Pillar Trims Description: How i made these 100% Real Carbon Fibre (Fiber) Door Pillar Trims These B pillar trims are from a Renault Megane sport mk2, Perfect match which simply replace the plastic trims! Products i used in this video. Aluminium powder https://www.easycomposites.co.uk/aluminium-tryhydroxide-filler-powder Gel Coat https://www.ecfibreglasssupplies.co.uk/polyester-gel-coat-bs-112-arctic-blue-sb-1180 Coupling Coat https://www.easycomposites.co.uk/uni-mould-vinylester-coupling-coat Tooling Resin https://www.easycomposites.co.uk/uni-mould-polyester-tooling-resin Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Filleting wax https://www.easycomposites.co.uk/soft-yellow-filleting-filling-wax Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Want to see a more detailed video about the mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g #prepreg #mouldmaking #carbonfibre Carbonworkshops@gmail.com </video> <video> CARBON FIBER gaiter cover. How to make tutorial [PREPREG Epoxy Carbon Fibre] Description: CARBON FIBER gaiter cover. How to make tutorial [PREPREG Epoxy Carbon Fibre] https://www.youtube.com/channel/UCM5RXSAAbRfyYvoMDB6F1Jg?sub_confirmation=1 How i made this 100% real carbon fibre (fiber) gear gaiter surround cover for my Renault Traffic Van. Using high temperature epoxy moulds and out of autoclave prepreg. Finished in a 2k acrylic clear coat. ** Products i used in this video ** Mould making materials https://www.easycomposites.co.uk/high-temperature-epoxy-mould-making-kit Sheet Wax https://www.easycomposites.co.uk/sheetwax Release Agent https://www.easycomposites.co.uk/easy... Filleting wax https://www.easycomposites.co.uk/soft... Prepreg Carbon https://www.easycomposites.co.uk/xc11... 00:00 Intro 00.42 Sheet Wax 01:55 Mould layup 03:15 Demould 04:30 Prepreg layup 05:55 Demould 07:40 Fitting Want to see a more detailed video about the mould check out this video - • PERFECT MOULD. Carbon Fibre Mold. Fue... #prepreg #mouldmaking #carbonfibre Carbonworkshops@gmail.com </video> <video> Carbon Fibre Split Mould Lay Up. Car Wing Mirror Cover [PREPREG] [OUT OF AUTOCLAVE] Description: Carbon Fibre Split Mould Lay Up. Car Wing Mirror Cover [PREPREG] [OUT OF AUTOCLAVE] Here I layup the split mould I previously made using Xpreg prepreg carbon fibre. The results are great, leaving minimal sanding back on the split line ready for clear coat. Products i used in this video in this step by step tutorial are - Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Release Film https://www.easycomposites.co.uk/r210-unperforated-release-film Breather Cloth https://www.easycomposites.co.uk/r210-unperforated-release-film Vacuum bag https://www.easycomposites.co.uk/vb160-vacuum-bagging-film Bagging Tape https://www.easycomposites.co.uk/vacuum-bagging-sealant-tape Clear coat used is Lechler Macrofan hs 2000 Want to see how the mould was made? - https://www.youtube.com/watch?v=5cMpsN_nuAM&t=336s #prepreg #diy #epoxy Carbonworkshops@gmail.com </video> <video> How to make a Carbon Fibre cover. OFFSET MOULD Using Sheetwax (Carbon Fiber) Description: How to make a Carbon Fibre cover. OFFSET MOULD Here i show you how i made carbon fibre fuel flap cover for a MG ZR, that fits perfectly around all edges and corners achieved by using high temperature sheet wax. Products i used in this video. Aluminium powder https://www.easycomposites.co.uk/aluminium-tryhydroxide-filler-powder Gel Coat https://www.ecfibreglasssupplies.co.uk/polyester-gel-coat-bs-112-arctic-blue-sb-1180 Coupling Coat https://www.easycomposites.co.uk/uni-mould-vinylester-coupling-coat Tooling Resin https://www.easycomposites.co.uk/uni-mould-polyester-tooling-resin Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Filleting wax https://www.easycomposites.co.uk/soft-yellow-filleting-filling-wax Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Sheet Wax https://www.easycomposites.co.uk/sheetwax Want to see a more detailed video about the mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g #prepreg #mouldmaking #carbonfibre Carbonworkshops@gmail.com </video> <video> Make Carbon Fibre using Henry hoover! Description: Want to see the full version of this video? https://www.youtube.com/watch?v=Mp_fTmnnH_E&feature=youtu.be </video> <video> How to make carbon fibre at HOME! DIY [vacuum bag] Description: Real Carbon Fibre Fuel Cover. An easy DIY option to make Carbon Fibre using a household hoover for vacuum bagging. The cost of this part, does not include re useable things like the mould, vacuum bag and hoover. I will add most company's make carbon fibre products using prepreg carbon fibre which is a lot more expensive to buy, cure and finish, however for nice cosmetic looking parts this can work great! Products used in this video - Gel Coat https://www.easycomposites.co.uk/epoxy-bonding-polyester-gelcoat-clear Laminating Resin https://www.easycomposites.co.uk/el2-epoxy-laminating-resin Carbon Fibre https://www.easycomposites.co.uk/200g-22-twill-3k-carbon-fibre-cloth Peel Ply https://www.easycomposites.co.uk/200g-22-twill-3k-carbon-fibre-cloth Breather Cloth https://www.easycomposites.co.uk/br180-breather-fabric Vacuum Storage Bags https://www.amazon.co.uk/GQC-storage-beddings-dust-free-moisture/dp/B084VLJG9V/ref=sr_1_29?keywords=vacuum+storage+bags&qid=1658939688&sr=8-29 #epoxy #diy #carbonfibre Carbonworkshops@gmail.com </video> <video> HOW TO MAKE 100% Real Carbon Fibre (Fiber) KTM Exhaust Guard Cover. [PrePreg] Description: How to make 100% Real Carbon Fibre (Fiber) KTM Exhaust Guard Cover. [PrePreg] Here I made a copy of the old plastic exhaust cover in carbon fibre for a KTM LC4 640. Products I used in this video in this step by step tutorial are - Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Release Film https://www.easycomposites.co.uk/r210-unperforated-release-film Breather Cloth https://www.easycomposites.co.uk/r210-unperforated-release-film The vacuum bags are food grade boil bags that i get from a friend. And sealed using a standard heat sealing machine. Clear coat used is lechler macrofan hs 2000 Want to see a more detailed video about the mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g #prepreg #ktm #carbonfibre Carbonworkshops@gmail.com </video> <video> Real Carbon Fibre YouTube Play Button. 10,000 Subs! Description: How to make real a Carbon Fibre YouTube Play Button. 10,000 Subs! Thank you all for getting me past 10,000 subscribers! If you want to see the video on how i made the carbon fibre flat sheet its here - https://youtu.be/AOuvKap_Zdw #carbonfibre #playbutton #diy </video> <video> HOW to make Carbon Fiber Gear knob insert [PREPREG EPOXY CARBON FIBRE] Description: HOW to make Carbon Fiber Gear knob insert [PREPREG EPOXY CARBON FIBRE] Here I made a copy of the old plastic gear insert from a Renault Clio Sport using prepreg carbon fibre out of autoclave. 00:00 Intro 02:10 Oven Cure 02:45 De mould 03:50 Apply stickers 04:40 Finished product Products I used in this video in this step by step tutorial are - Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Release Film https://www.easycomposites.co.uk/r210-unperforated-release-film Breather Cloth https://www.easycomposites.co.uk/r210-unperforated-release-film Coating Resin https://www.easycomposites.co.uk/xcr-epoxy-coating-resin Want to see a more detailed video about the mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g #prepreg #renault #carbonfibre Carbonworkshops@gmail.com </video> <video> 100% Real Carbon Fibre (Fiber) KTM Brake Pump Cover Description: How i made this 100% real carbon fibre (fiber) KTM brake pump cover. Products i used in this video. Aluminium powder https://www.easycomposites.co.uk/aluminium-tryhydroxide-filler-powder Gel Coat https://www.ecfibreglasssupplies.co.uk/polyester-gel-coat-bs-112-arctic-blue-sb-1180 Coupling Coat https://www.easycomposites.co.uk/uni-mould-vinylester-coupling-coat Tooling Resin https://www.easycomposites.co.uk/uni-mould-polyester-tooling-resin Release Agent https://www.easycomposites.co.uk/easylease-chemical-release-agent Filleting wax https://www.easycomposites.co.uk/soft-yellow-filleting-filling-wax Prepreg Carbon https://www.easycomposites.co.uk/xc110-210g-22-twill-3k-prepreg-carbon-fibre Want to see a more detailed video about the mould check out this video - https://www.youtube.com/watch?v=8o2mrwxbt1g #prepreg #mouldmaking #carbonfibre Carbonworkshops@gmail.com </video>

Contacts and Links

Description

Here you'll find the best video tutorials for beginner and advance composites!!

https://www.youtube.com/channel/UCM5RXSAAbRfyYvoMDB6F1Jg?sub_confirmation=1

I started this channel to share my passion of composites by uploading videos of what goes into making some quality 100% real carbon fibre products.

Everything iv learnt has just been through trial and error as a hobbie in my back garden!

Along with mould making, resin infusion, prepreg carbon fibre, hand layup carbon fibre, 2k clear coat. Sharing tips and tricks along the way.

Enquiries - Carbonworkshops@gmail.com

Videos from channel