Channel Title: Fiber Optics For Sale Co. Channel Description: Fiber Optics For Sale Co. is a full line stocking distributor of fiber optic communication products. Including fiber optic cables, tools, test equipment, cable management products, and more! <video> What is a SC(Single Mode) to SC(50µm OM2 Multimode) Mode Conditioning Patch Cable? Description: Order it here: https://www.fiberoptics4sale.com/products/f1-mcp-5-1-sc-sc This is the part number F1-MCP-5-1-SC-SC. It is a mode conditioning patch cable from duplex SC to duplex SC. One SC leg is single mode fiber with yellow jacket. This single mode fiber is then spliced by this mode conditioning splice with 50 micron OM2 multimode fiber. Once the single mode laser passes through the mode conditioning splice, it gets offset and spreaded out within the multimode fiber core to optimize for multimode propagation performance. The patch cable length is 5 meters long. The cable jacket is 2mm. Each cable is individually tested from both directions. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a ST(Single Mode) to MTRJ(62.5µm OM1 Multimode) Mode Conditioning Patch Cable? Description: Order it here: https://www.fiberoptics4sale.com/products/f1-mcp-1-2-st-rj This is part number F1-MCP-1-2-ST-RJ. It is a ST to female MTRJ mode conditioning patch cable. One ST leg is single mode, it splices onto a 62.5 micron OM1 multimode fiber by the mode conditioning splice. The single mode laser from the ST connector is offset and spreaded out within the multimode fiber core to optimize for multimode propagation performance. The patch cable is 1 meter long. Each cable is individually tested from both directions. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a LC to SC Duplex 50µm OM3 10Gig Multimode Fiber Patch Cable (X8LYM2FISC)? Description: Order it here: https://www.fiberoptics4sale.com/products/x8lym2fisc This is part number X8LYM2FISC. It is a 2 meters long LC to SC duplex 50 micron OM3 10Gig multimode patch cable with 1.6mm jacket. Each fiber is individually tested to verify its performance. Insertion loss and return loss are tested from both directions and reported on this card. The typically insertion loss is only 0.07 dB, and the return loss is less than negative 37 dB. The jacket is 1.6mm in diameter. Duplex LC on one side, and duplex SC on the other side. The aqua color means that the fiber is 50 micron OM3 10Gig laser optimized multimode fiber. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a SC(Single Mode) to SC(50µm OM2 Multimode) Mode Conditioning Patch Cable? Description: Order it here: https://www.fiberoptics4sale.com/products/f1-mcp-10-1-sc-sc This is part number F1-MCP-10-1-SC-SC. It is a 10 meters long mode conditioning patch cable from SC to SC. One SC leg is single mode fiber with a yellow jacket. This single mode fiber is fusion spliced with 50 micron OM2 multimode fiber. The single mode laser from the single mode SC connector is offset and spreaded out within the 50 micron multimode fiber core to optimize for multimode propagation performance. Each cable is individually tested from both directions. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a SIMPTE Lemo Connector Cleaning Kit (SMCLKIT)? Description: Order here: https://www.fiberoptics4sale.com/products/smclkit This is the SMPTE connector cleaning kit, part number is SMCLKIT. This cleaning kit is designed for both mobile and studio applications. Use this kit to clean your LEMO and standard fiber optic connectors, and ensure that you have a contaminant free end face. Let’s see what is in the kit. Here is Chemtronics’s ElectroWash PX cleaning agent. This is Chmetronics’s general instruction on cleaning fiber optics. Here is the QbE wipes from Chemtronics. For cleaning regular fiber optic connector end faces. There are two packs of Cletop 2mm cleaning sticks, each pack has 5 sticks. It is used to clean 2mm fiber optic termini. Here is the 2.5mm fiber optic foam swabs, designed for bulkhead cleaning, use it together with the ElectroWash PX agent to clean 2.5mm ferrule fiber connectors, such as ST, SC, FC connectors. Here is the Chemtronics wipes, 100 pcs in the box. You can use the wipes with the ElectroWash PX for optical fiber preparation, such as for stripping and cleaving optical fibers before fusion splice. Here is the ElectroWash MX, designed to work with the wipes to clean fiber cable gels or pulling lubricant. And the last item in the kit is the LEMO connector alignment sleeve removal and insertion tool. This tools has two ends, both ends are threaded. We will show you how to use this tool to remove and insert the LEMO connector fiber alignment sleeves. We have this tool kit in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> How to clean SC, ST, FC connectors with Hux cleaner pen (HUXCLEANER2_5)? Description: Order it here: https://www.fiberoptics4sale.com/products/huxcleaner2_5 This is part number HUXCLEANER2_5. It is a pen-shaped in-adapter ferrule cleaner for 2.5mm ferrule connectors such as SC, ST, FC connectors. Here is the cleaning tip which is dry cloth. You can rotate the pen’s waist one to two circles each time to clean the connectors. The cleaner is not designed to clean the connectors directly. Rather it is designed to clean connectors within an adapter. We insert the pen’s tip into the adapter’s sleeve, keep a very light pressure, and then rotate the pen’s waist once or twice. Once you hear the clicks, the cleaning is done. Don’t push too hard, and don’t turn more than two rotations for each cleaning. For better result, you can also rotate the whole pen for a few circles. That should get your connectors cleaned, within the adapter. Each cleaner offers more than 500 times cleaning. It works for SC, ST, and FC connectors. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a LC to SC Duplex 50µm OM4 10Gig Multimode Laser Optimized Fiber Patch Cable (X10LYM1FISC)? Description: Order it here: https://www.fiberoptics4sale.com/products/x10lym1fisc This is part number X10LYM1FISC. It is a 1 meter long duplex LC to duplex SC patch cable. The fiber is 50 micron OM4 laser optimized 10Gig multimode fiber. The aqua color means that it is 10Gig laser optimized multimode fiber. Each cable is individually tested from both ends. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> How to do a mechanical optical fiber splice with Corelink fiber splice (FO45900)? Description: Order it here: https://www.fiberoptics4sale.com/products/fo45900 This is TE Connectivity’s Corelink mechanical fiber splice for single mode and multimode fibers. It is a plastic device with v-grooves to align the fibers and a clamping mechanism to lock the fibers in place. Let’s show you how to use it. We are going to splice a 250 micron fiber. First let’s strip the fiber. Here is the key to open and lock the mechanical splice channel. Two keys come with orders of 12 or more of the Corelink mechanical splices. If you order less, you would have to order the key separately. Now let’s cleave the fiber. First clean it with a lint free wipe and isopropyl alcohol. The cleave length is 8 to 9 mm. We put the fiber in the 250 micron groove of the fiber cleaver. One click and the fiber is cleaved. Now we need to open the channel of the splice. This is done by inserting the key into the key slot, and rotate it 90 degree downwards. Now we can insert the cleaved fiber into the alignment channel. Push the fiber until it stops, keep the pressure and lock the fiber in place by rotating the key 90 degree upwards. Remove the key, and now the fiber is firmly locked in place. Now let’s do the other side. First use the key to unlock the channel. We strip and cleave the fiber. Remember that the cleave length is 8 to 9 mm. We can now insert the second fiber into the alignment channel, until it stops. Keep the pressure, lock the fiber by rotating the key upwards 90 degree. Now both fibers are locked in place firmly. This is the finished mechanical fiber splice. It works for both single mode and multimode fibers. The Corelink mechanical device works for for both 250 micron bare fibers and 900 micron tight buffered fibers. Please refer to its instruction sheet for more detailed info. We have this product in stock at Fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a LC to SC Duplex 50µm OM4 10Gig Multimode Laser Optimized Fiber Patch Cable (X10LYM5FISC)? Description: Order it here: https://www.fiberoptics4sale.com/products/x10lym5fisc This is the part number X10LYM5FISC. It is a duplex SC to LC patch cable. The fiber is 50 micron OM4 10Gig laser optimized multimode fiber. The length is 5 meters. The aqua color means that the fiber is OM4 10Gig multimode fiber. Each cable is individually tested. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is Molex's Streamline Series 3 Ports Single Gang Wallplate (WPJ-00009-XX)? Description: Order it here: https://www.fiberoptics4sale.com/products/wpj-00009-xx This is part number WPJ-00009. It is the streamline series wall plate with three positions from Molex. Here is the wall plate. It is a low profile plastic 3 position wall plate from Molex. It is rear loading to prevent from tempering. It includes the label and mounting screws. It includes a instruction for loading single position modules or blanks. You can load copper, fiber and coaxial modules. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a ST (Single Mode) to MTRJ (50µm Multimode) Mode Conditioning Patch Cable? Description: Order it here: https://www.fiberoptics4sale.com/products/f1-mcp-1-1-st-rj This is part number F1-MCP-1-1-ST-RJ. It is a mode conditioning patch cable from ST to MTRJ connectors. This is the mode conditioning splice from single mode fiber to multimode fiber. One ST connector is single mode fiber, and all the three other fibers are 50 micron OM2 multimode fiber. The mode conditioning splice offset and spreads out the single mode laser within the multimode fiber core to optimize for multimode propagation. It is a female MTRJ connector, and two ST connectors. The cable jacket size is 2mm. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a Type H Diamond Lapping Film (HDF5XN0_5662XW)? Description: Order it here: https://www.fiberoptics4sale.com/products/hdf5xn0_5662xw This is part number HDF5XN0_5662XW. It is a Type H diamond lapping film. Sold in a pack of 25 sheets. The abrasive material is diamond particles. It has a higher concentration. The particle size is 0.5 micron. The thickness of the backing is 3 mil. It is a 5 inches disc, which is about 127 mm in diameter. This film has higher diamond concentration and harder resin bond. This lapping film has longer durability and increased cutting rate over standard diamond lapping films. It is a pack of 25 pcs. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a LC to SC Duplex 50µm OM4 10Gig Laser Optimized Multimode Fiber Patch Cable (X10LYM2FISC)? Description: Order it here: https://www.fiberoptics4sale.com/products/x10lym2fisc This is the part number X10LYM2FISC. It is a 2 meters long duplex LC to duplex SC connector patch cable. The fiber is 50 micron OM4 10Gig laser optimized multimode fiber. The aqua color means that it is OM4 10Gig laser optimized fiber. Each cable is individually tested to verify its performance from both ends of the connectors. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a Reflective Labeling Kit (F1-RKIT)? Description: Order it here: https://www.fiberoptics4sale.com/products/f1-rkit This is part number F1-RKIT. It is a kit with reflective labeling. With 25 pcs of A to Z letters, 25 pcs of 0 to 9 numbers, 25 pcs of blank labels, and 25 pcs of dash symbols. This is the number 0, there are 25 pcs of this zero reflective label, it is self-adhesived, so you can peel off the white paper and then stick it to where needed. Here is 25 pcs of number 1, 2, 3, all the way to number 7, 8, 9. Starting from letter A, B, until letter Z. And then there are 25 pcs of dash, also 25 pcs of blank label, there is nothing on the blank label. All these labels are self-adhesive at the back, and you can simply peel off the white paper and stick the labels to your desired locations. These labels are reflective. When there is light shining on the label, you get very visible high reflection. Labels are laminated for protection against UV, abrasion, and chemicals. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video> <video> What Is a ST(Single Mode) to MTRJ(50µm OM2 Multimode) Mode Conditioning Patch Cable? Description: Order it here: https://www.fiberoptics4sale.com/products/f1-mcp-3-1-st-rj This is the part number F1-MCP-3-1-ST-RJ. It is a mode conditioning patch cable from ST to MTRJ connectors. One ST connector is single mode fiber, the yellow jacket one. The other three legs, one ST and a duplex MTRJ connector, are all 50 micron OM2 multimode fiber with 2mm jacket. The length is 3 meters long. The single mode from the ST leg fuses by the mode conditioning splice with the multimode fiber. The single mode laser is offset and spreaded out within the mulitmode fiber core to optimize for multimode propagation. Each cable is individually tested in both directions. Insertion loss and return loss are recorded on this label. We have this product in stock at fiberoptics4sale.com. Order it by following the link below. Also don’t forget to subscribe to our Youtube and Vimeo channel for more free fiber optic training videos. </video>

Contacts and Links

Description

Fiber Optics For Sale Co. is a full line stocking distributor of fiber optic communication products. Including fiber optic cables, tools, test equipment, cable management products, and more!

Videos from channel