Channel Title: Jonathan Valvano Channel Description: I am a professor at the University of Texas at Austin. I teach three embedded system classes based on the ARM Cortex M using the Texas Instruments Tiva TM4C123 Launchpad. For more information, see http://users.ece.utexas.edu/~valvano/ . Spring 2014 Professor Yerraballi and I will teach an online class on Embedded Systems. For more information see: https://www.edx.org/course/utaustinx/utaustinx-ut-6-01x-embedded-systems-1172. . <video> Video 2.1.4. Initialization of an Output Pin Description: To initialize an output pin the software writes to the PINCM and DOE registers. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.1.2. A GPIO input pins allows for input. Description: Software can check the status of an input pin by reading the DIN register of the port. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.2.2 How to unbrick an MSPM0 microcontroller Description: Sometimes the MSPM0 becomes unprogrammable, giving RED ERRORs when trying to debug. This video shows how to unbrick it: 1) press and hold S1; 2) press and release reset; 3) issue a debug command in CCS; 4) when download is complete, release S1. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.1.7 GPIO Input Description: To input from an input pin the software reads from the DIN register. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.1.7 GPIO Input Description: To input to an input pin the software reads from the DIN register. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.1.5 Initialization of an Input Pin Description: To initialize an input pin the software writes to the PINCM register. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Programming the if-then-else statement in C Description: False is zero and true is any nonzero value. For more information, see https://users.ece.utexas.edu/%7Evalvano/mspm0/ </video> <video> Video 2.1.3. GPIO Output Description: Software writes to the GPIO output register to perform outputs to the pins. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Jonathan Valvano is live! Description: </video> <video> Video 2.4.1 Flashing an LED using a software delay loop. Description: In this video we use a software delay loop (counting bus cycles) to flash an LED. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.3.1 Connecting to a solderless breadboard Description: We use male-male wires to connect circuits to the LaunchPad. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.2.1 MSPM0 LaunchPad Description: In this class, we will use the MSPM0G3507 LaunchPad from Texas Instruments. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.1.1. Four categories of Input/Output Interfaces Description: Input/Output Interfaces can be parallel, serial, analog or time. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Video 2.1.6 GPIO Output Description: To output to an output pin the software writes to the DOUT register. This video is part of the ebook at https://users.ece.utexas.edu/~valvano/mspm0/ebook/index.htm </video> <video> Lab2 Logic Analyzer Description: The TExaSdisplay is a free simple logic analyzer that plots up to 7 digital channels versus time, sampled at 10 kHz. This example runs of the MSPM0G3507 LaunchPad. For more information, see https://users.ece.utexas.edu/~valvano/mspm0/ </video>

Contacts and Links

Description

I am a professor at the University of Texas at Austin. I teach three embedded system classes based on the ARM Cortex M using the Texas Instruments Tiva TM4C123 Launchpad. For more information, see http://users.ece.utexas.edu/~valvano/ . Spring 2014 Professor Yerraballi and I will teach an online class on Embedded Systems. For more information see: https://www.edx.org/course/utaustinx/utaustinx-ut-6-01x-embedded-systems-1172. .

Videos from channel