Channel Title: Machinery Consultants Inc Channel Description: OFFERING PRE-OWNED METALWORKING MACHINES WITH VERY LIMITED USE SINCE 1963 MACHINES ARE AVAILABLE FOR INSPECTION AT OUR FACILITY, LOCATED 5 MINUTES FROM THE SLC UTAH INTL AIRPORT * FOCUSING ON ENGINE LATHES * MILLING MACHINES, BORING MACHINES * RADIAL DRILLS * BANDSAWS * SHEARS * ETC * * WE ALSO SELL & SERVICE THE NEW MACHINERY, FOCUSING ON LATHES, MILLING MACHINES, BANDSAWS, DRO, PWR FEEDS, & PARTS Machinery Consultants Inc. 1390 West 200 East Salt Lake City, UT 84104 Office Ph: 801-531-9500 Fax: 801-531-9555 Email: mci@machineryconsultants.com Website: www.machineryconsultants.com <video> TREE MILL DEMO VIDEO FROM MACHINERY CONSULTANTS IN UTAH Description: TREE MILL DEMO VIDEO FROM MACHINERY CONSULTANTS IN UTAH Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com </video> <video> Kingston HJ Series Lathe, Model HJ1100BB Precision Toolroom Lathe / 3" Spindle D-1-8 in 17” X 43” Description: MACHINERY CONSULTANTS INC BILL WILSON JR. 1390 W. 200 S. Salt Lake City, UT 84104 Ph: 801-531-9500 E mail: mci@machineryconsultants.com website: www.machineryconsultants.com Kingston Machine Mfg. High Accuracy & Rugged Tool Room Lathe 17" Swing X 43" Centers distance ~ Model HJ - 1100 - BB ( NEW ) Workhorse, High Accuracy & Rugged / 29 - 1640 RPM / Inch & Metric Threading, foot Brake, E - Stop Button c/w: Chuck Guard Capacity in swing Over Bed 17” Swing Over Cross Slide 10 9/16” Swing in Gap 24” Distance Between Centers 43.5” Width of Bed 11.75" Length in front of face plate 5-7/8” Height of Center from Leg Bottom 42 3/8” Headstock Spindle Bore 3.25” Taper of Spindle Bore & Center M.T. #6 x #4 Type of Spindle Nose D1-8 Number of Spindle Speed 12 - Changes Rpm Range of Spindle Speed 29-1640 RPM Gear Box Number of Feed Changes 16 Feeds per Revolution Longitudinal 0.0012 – 0.034 inch Cross 0.0008 – 0.023 inch Diameter and pitch of lead screw ø1 3/8”, 4 TPI Range of inch threads 2-72 TPI (44) Range of metric pitches 0.2 – 14mm (39 kinds) Tool Slide Maximum Travel of Compound 5-7/8" Maximum Travel of Cross Slide 10-3/4" Tailstock Maximum Travel of Tailstock Quill 5-7/8” Tailstock Quill Diameter 2-3/8”, #4 MT Motor Main Drive Motor 7.5 HP ( 3 phase motor) Motor Voltage: 220/440 Volts (3 Phase) please advise if either 220 volts or 440 volts for Pre-Wire before ship-out Dimension Floor Space 98” x 41” Weight 4,260 lbs STANDARD EQUIPMENT & ACCESSORIES • Main Motor: 7.5 HP, 230V / 460V, 3 Phase, 60 Cycle, Switch & Wiring • 3.25" Spindle Bore • Spindle Nose: D1-8 • 12 Spindle Speeds (29 – 1640 RPM) • Timing Belt For Gear Changes • Hardened & Ground Bed Ways And Cross Slide • Automatic Longitudinal Feed Stop Bar • 4-Way Tool Post Fitted to T-Slotted Compound • Thread Chasing Dial • LED Work Light • 12” 3-Jaw Scroll Chuck • Chuck Guard • Headstock Spindle Center Adaptor: MT#6 to #4 • 4.7” Steady Rest With Roller Jaws • Coolant System With Pump And Piping • Full-Length Splash Guard • Tool Box w/ Necessary Wrenches & Spanners • Instruction Manual & Parts List Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com </video> <video> NARDINI SZ 25 x 120 LATHE Model SZ 25120 / Inch & Metric Threading, Mint w Very limited use 1 owner Description: MACHINERY CONSULTANTS INC BILL WILSON JR. TECHNICAL SALES MGR. 1390 W. 200 S. Salt Lake City, UT 84104 Ph: 801-531-9500 Fx: 801-531-9555 Em: mci@machineryconsultants.com www.machineryconsultants.com NARDINI SZ 25 x 120 LATHE Model SZ 25120 / Inch & Metric Threading, Mint Limited Use condition (Can be seen under Power in Utah showroom) We are pleased to offer, subject to prior sale and our conditions of sale, the following item for your consideration: Pre-Owned NARDINI SZ 25 x 120 LATHE, HD Lathe - Model SZ 25120 S/N SZA25120T-A Inch & Metric Threading ~ Mfg. by Nardini, ***Referring to ”The Green-One from the Manufacturer” = Made & Mfg. in Brazil in mid 1990’s General Specifications, Approximate Subject to Verification Swing over bed 25 5/8” Swing over cross slide 17 5/16” Distance between centers 126” ** Swing thru Removable Gap: 33 7/8” gap section is (12 ¼”in length outwards from face of Spindle) Spindle nose D-1-8 Spindle bore 3 1/8” Spindle speeds (18) 19 to 1500 RPM Tailstock taper #5 MT Width of bed 18” Width of Carriage: 22” Threads, in Inch: (48) 2 – 42 TPI Threads, in Metric: (48) .5 – 35 MM Threads, in Module: (48) 0.20 to 15 MOD Feeds (standard in Inch & Metric) 0.08 TO .02653" in IPR Main motor (15 KW) = 20 HP, 220/440V ( it’s at 440 volts Now ) Approx. weight 10,000 lbs. to 11,000# lbs. Approx. dimensions (Length 16’ 5” ) 199” Length X 48” Wide x 68” Height Complete with: PRT ~ Power Rapid Traverse Motorized Feeds / on Carriage & cross slide Taper attachment, full length w/bed clamp 2 each Steady Rests, Removable-Chip pan, Thread chasing dial, Micrometer Bed Stop Removable Gap section for extra Swing if needed, 34” swing capacity for 12” out-spindle - Dorian SD40CA Quick Change Tool Post w./several Holders - Graduated Inch & Metric Dials on Cross slide & compound Slide - 12” 3 Jaw chuck, Steel-body / 2 Piece Top Jaws, European Mfg. - Misc. Live Centers for Tailstock, Bull Nose Live Centers, standard Dead-Centers - Jacobs 18N Drill chuck w/Shank - Hardened ways from Factory, - Note the Info-plates for headstock info are in perfectly new condition, immaculate - Trax Lathe DRO Unit – 2 axis, Included at No charge, DRO’s Working @ present time - Owners Manual / has full-coolant system, Condition: Very Limited Use Condition, High-Precision tool room lathe, runs very well.....Truly a Clean One-Owner) Bed Ways & /cross slide are exceptional (common wear items all still available thru Nardini) This machine is very well-tooled & has lots of extras included in package. Inventory #2023-130 </video> <video> Kingston HD Series Lathe in Utah, Precision Gap Bed / HD 26 X 90 / RUN DEMO Description: Kingston HD Series Lathe in Utah, Precision Gap Bed / HD 26 X 90 RUN DEMO Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Kingston HD Series Lathe in Utah, Precision Gap Bed / 4" Spindle Bore 22" or 26" Swing in HD Series STANDARD EQUIPMENT & ACCESSORIES, INCLUDED IN MACHINE PRICE • Main Motor: 10 HP / 15 HP (22"/26" swing), 220V/440V, 3 phase, 60 cycle, switch & wiring complete – Specify voltage desired @ ordering • 4 1/6" Spindle Bore is standard on HD model • Spindle Nose: D1-8 / D1-11 Camlock (22"/26") • 12 Spindle Speeds (13 - 1200 RPM) • Headstock Spindle Center Adaptor: MT#7 x #5 • Ground Steel Center MT#5 for Headstock • Cross Slide Screw: 8 / 5 TPI (22" / 26" swing) • Lead Screw: 4TPI / 2 TPI (22" / 26" swing) • Thread Chasing Dial • 4-way Tool Post fitted to T-slotted compound • 10” Steady Rest with roller jaws ( standard ) • Longitudinal Rapid Traverse Standard on The size of CC: 90", 120", & 160" • Hardened & Ground Bed & Cross Slide Ways • Automatic Longitudinal Feed Stop Bar • Two-Speed Drive Tailstock Spindle (MT#5) • Coolant System with Pump and Piping • Pull Drawer Chip (Oil) Pan • 12" Back Plate • Full Length Splash Guard • Halogen Work Light • Tool Box w/ necessary Wrenches & Spanners • Instruction Manual & Parts List GENERAL MACHINE SPECIFICATIONS HD-22 HD-26 Capacity Swing Over Bed ( 2 Swing sizes ) 22" 26" Swing Over Cross Slide 13" 17-1/2" Swing in Gap 31-3/8" 35-1/8" Gap Width in Front of the Face plate 10-5/8" Distance between centers (5 length) 35” 60" 90" 120" 160" Width of Bed 15-3/4" Height of Center from Leg Bottom 42" 44-5/16" Headstock Spindle Bore 4-1/16” Hole dia. Taper of Spindle Bore & Center M.T. #7 x MT #5 Type of Spindle Nose D1-8 D1-11 Number of Spindle Speed 12 changes Spindle Speed 13-1200 RPM Gear Box Number of Feed Changes 16 Range of Feeds per Revolution 0.0024” - 0.039” Longitudinal Cross 1/3 of longitudinal feed Leadscrew diameter & threads per inch 1 ¾”, 4TPI 1 ¾”, 2 TPI Range of inch threads 2-72 (44) 1-36 (44) Range of metric pitches 0.2-14 (39) Tool Slide Maximum Travel of Compound 9-17/32" Maximum Travel of Cross Slide 15-3/4" Tailstock Tailstock Quill Travel 7" Tailstock Quill Diameter 2-15/16" Taper in Tailstock Quill M.T. #5 Motor Main Drive Motor 10 HP 15 HP Coolant Pump Motor 1/8 HP </video> <video> Mori Seiki Engine Lathe Model MR 1500 21” x 60” Demo with Cutting Chips on Bronze Brass Description: MACHINERY CONSULTANTS INC Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Hello from Bill Wilson Jr. Pre-Owned Moriseiki 21” x 60” Engine Lathe Mori Seiki Engine Lathe Model MR 1500 21” x 60” Franky starts Cutting Chips on Bronze Brass Condition: Great Low Hour Toolroom Lathe. Looks and Runs Brand New. Super quiet!! </video> <video> Bridgeport Heavy Duty Vertical Mill Model No: Series II ~ SN 7122 • Chromed Ways flaking - Mint Description: MACHINERY CONSULTANTS INC BILL WILSON JR. TECHNICAL SALES MGR. 1390 W. 200 S. Salt Lake City, UT 84104 Ph: 801-531-9500 Fx: 801-531-9555 Em: mci@machineryconsultants.com www.machineryconsultants.com Pre-Owned Bridgeport Heavy Duty Vertical Mill Model No: Series II ~ Serial No: 7122 / Mint condition General specifications are approximate and are subject to verification. Table Working Surface: 11” x 58” Longitudinal Travel: 35” Cross Travel: 15” Knee Travel: 15” Quill Travel: 5” Spindle Speeds: 50 to 3500 Variable Taper in Spindle: 40 NST-QC Erickson Spindle Standard #40 NST-40 NMTB Feeds: 0 to 100 Variables Main motor: 4 HP Electricals: 220/440 V Approx. Weight: 5,000 lbs. Approx. Dimensions: 93” H x 76” L x 77” W Complete with: • Power Feed Unit, ** Built In-Motorized, for all 4 Axis ( Has Quill-spindle Power Feed Unit) • Coolant System Pump • Auto Lube Oil System • Chromed Ways, All Original Flaking Highly visible • It Has 6” riser block on it now. • It Has a factory-OEM rear mounted Vertical Slotting attachment “OEM Bridgeport unit” • #40 NST Tooling Package, it Has some Very nice tooling Items, & shown in Pics & the Video • Newall 2 Axis dro is available, it would be considered extra, add $XX • Newall 3 Axis dro is available, it would be considered extra, add $XX for 3rd axis is on the knee Condition: Mint, limited use Mill from a satellite research shop, US gov’t contractor type shop, Great, low hour mill. Runs good and looks good! Original Flaking Highly visible & V well maintained Mill’s Asking Price FOB Our Warehouse: Loaded onto Air ride Trailer: Inventory No: 2023-699 </video> <video> Sidney lathe USA 18” x 102” S/N 8565 in Pristine Superb Condition & Runs very well Description: MACHINERY CONSULTANTS INC Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Sidney lathe USA 18” x 102” S/N 8565 Pre-Owned, this will make someone a great machine, Excellent reputation & super high quality, in Pristine Superb Condition PRE-OWNED TOOLROOM SHOP LATHE, SIDNEY LATHE 18” x 102” Sidney lathe-USA / S/N 8565 General specifications are approximate, subject to verification Swing over bed 18”” Swing over cross slide 11 ½” Max distance b/t centers 102” Spindle nose Sidney threaded Nose Taper (possible DIN Type) Spindle bore 1 5/8” Spindle speeds (16) 14 TO 560 RPM Tailstock taper #4 Morse Taper Threads: Inch 2 ½ to 92 TPI Carriage & cross slide Feed Range (16) .0035 to .172 IRP / IPM Main motor 5 or 7.5 HP / 220/440 Volts* its at 440 Volts presently Approx. dimensions __ feet long 4’ W x 58” Height Approx. weight 5,000# LBS Inventory MCI Stock 2023 670 Complete With • Herringbone style gear design for high accuracy & rugged design • HARD, SHINY BED WAYS IN VERY LIMTED USE, SUPER CLEAN • 10” 3 Jaw chuck, OEM Sidney supplied, 9-S-36 European stamp on face • TAPER ATTACHMENT & BED CLAMP • TOOLPOST PKG, CXA SIZE, Quick change & a few Holders • COOLANT PUMP, BAMBA TPE W/HOSE • MICROMETER BED STOP • CHIP PAN is BUILT IN TYPE UNDER FRAME DESIGN • THREAD CHASING DIAL Yes • KEYED DRILL CHUCK FOR TAILSTOCK Condition: VERY GOOD, & LIMITED USE Lathe, Pristine Superb Condition Sidney is a really well built Machine, Super nice-Quality-tool room lathe, recently pulled from long term storage, came to us & it Runs very well </video> <video> Kingston HR Series Lathe in Utah, Heavy Duty Model HR 6000 / 40” X 240” New-Lathe Run-Demo Description: Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Hello from Bill Wilson jr. ** Please inquire & request the most current quote for the Kingston lathe, Model HR series, it covers there full range of sizes And please do note, the size of swing over bed ways & the Center to Center distances, are all listed out, on the Grid Price Format, which is on Page 1 of the quote. So depending on the size of lathe, there is a specific Model Number for that size of Lathe. So therefore, it cover the Model: HR 2000 all the way up thru the Model: HR 8000 Known as “The Workhorse” in machine shops across the country, Kingston’s heavy-duty HR model has been the industry leader in its class for over 40 years. At the heart of this machine is a strong and rigid headstock with a hardened and ground main spindle, which features a 4.09” bore and a 3-point bearing support system for superior cutting capability. Operators benefit from the increased control that comes with 16 spindle speeds (8 – 800 RPM) and a wider range of feeds and threading choices. The unique rib structure of the 22” bedway is made with high-quality casting to ensure greater stability and accuracy in heavy-duty applications. The HR MODEL is available in 30”, 34”, or 40" bed-ways Swing & lengths from 80” up to 320” </video> <video> Kingston HD Series Lathe in Utah, Precision Gap Bed / 2 New Lathes Run-Demo in 26 X 90 & 26 X 120 Description: Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Kingston HD Series Lathe in Utah, Precision Gap Bed / showing 2 models HD 26 X 90 / HD 26 X 120 22" or 26" Swing over bed Distance between centers (5 lengths available) 35” 60" 90" 120" 160" Kingston HD Series Lathe in Utah, Precision Gap Bed / 4" +Spindle Bore / 22" or 26" Swing in HD Series Precision Gap Bed Engine Lathe with 4" Spindle Bore STANDARD EQUIPMENT & ACCESSORIES, INCLUDED IN MACHINE PRICE • Main Motor: 10 HP / 15 HP (22"/26" swing), 220V/440V, 3 phase, 60 cycle, switch & wiring complete – Specify voltage desired @ ordering • 4 1/6" Spindle Bore is standard on HD model • Spindle Nose: D1-8 / D1-11 Camlock (22"/26") • 12 Spindle Speeds (13 - 1200 RPM) • Headstock Spindle Center Adaptor: MT#7 x #5 • Ground Steel Center MT#5 for Headstock • Cross Slide Screw: 8 / 5 TPI (22" / 26" swing) • Lead Screw: 4TPI / 2 TPI (22" / 26" swing) • Thread Chasing Dial • 4-way Tool Post fitted to T-slotted compound • 10” Steady Rest with roller jaws ( standard ) • Longitudinal Rapid Traverse Standard on The size of CC: 90", 120", & 160" • Hardened & Ground Bed & Cross Slide Ways • Automatic Longitudinal Feed Stop Bar • Two-Speed Drive Tailstock Spindle (MT#5) • Coolant System with Pump and Piping • Pull Drawer Chip (Oil) Pan • 12" Back Plate • Full Length Splash Guard • Halogen Work Light • Tool Box w/ necessary Wrenches & Spanners • Instruction Manual & Parts List GENERAL MACHINE SPECIFICATIONS HD-22 HD-26 Capacity Swing Over Bed ( 2 Swing sizes ) 22" 26" Swing Over Cross Slide 13" 17-1/2" Swing in Gap 31-3/8" 35-1/8" Gap Width in Front of the Face plate 10-5/8" Distance between centers (5 lengths available) 35” 60" 90" 120" 160" Width of Bed 15-3/4" Height of Center from Leg Bottom 42" 44-5/16" Headstock Spindle Bore 4-1/16” Hole dia. Taper of Spindle Bore & Center M.T. #7 x MT #5 Type of Spindle Nose D1-8 D1-11 Number of Spindle Speed 12 changes Spindle Speed 13-1200 RPM Gear Box Number of Feed Changes 16 Range of Feeds per Revolution 0.0024” - 0.039” Longitudinal Cross 1/3 of longitudinal feed Leadscrew diameter & threads per inch 1 ¾”, 4TPI 1 ¾”, 2 TPI Range of inch threads 2-72 (44) 1-36 (44) Range of metric pitches 0.2-14 (39) Tool Slide Maximum Travel of Compound 9-17/32" Maximum Travel of Cross Slide 15-3/4" Tailstock Tailstock Quill Travel 7" Tailstock Quill Diameter 2-15/16" Taper in Tailstock Quill M.T. #5 Motor Main Drive Motor 10 HP 15 HP Coolant Pump Motor 1/8 HP </video> <video> Kingston HD Series Lathe Intro for Running Demo we did here in Utah whse. new Lathes / V Popular Description: Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Kingston HD Series Lathe in Utah, Precision Gap Bed / 4" Spindle Bore 22" or 26" Swing in HD Series Precision Gap Bed Engine Lathe with 4" Spindle Bore Kingston HD Series Lathe in Utah, Intro for Running Demo on these 2 New Kingston Lathes in HD Series </video> <video> Mori Seiki Engine Lathe, Model MS1250, Running 4 RPM Speeds, demo to run thru the functions & op's Description: This machine has been sold. Please call for similar models. Lathe Demo Inspection for Special Client whom has purchased this lathe, so were doing an in house demo to run thru the functions & operations. MACHINERY CONSULTANTS INC Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Hello from Bill Wilson jr Pre-Owned Mori Seiki 17” x 49” Engine Lathe Model: MS1250 Serial No: 8381 Lathe Demo Inspection for Special Client whom has purchased this lathe, so were doing an in house demo to run thru the functions & operations. </video> <video> Mori Seiki Engine Lathe Model MS1250 17” x 49” Lathe Demo Inspection Description: This machine has been sold. Please call for similar models. MACHINERY CONSULTANTS INC Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Hello from Bill Wilson jr Pre-Owned Mori Seiki 17” x 49” Engine Lathe Model: MS1250 Serial No: 8381 Lathe Demo Inspection General specifications are approximate and are subject to verification. Swing over bed: 17 1/8” Swing over slide: 9 3/4" Max center distance: 49” Spindle nose: A 1 6 Spindle bore: 2” Spindle speeds: 12 Changes from 32 to 1800 RPM Tailstock Taper: #4 MT Width of bed: 14” Threads: 35 Changes from 4 to 80 TPI Threads in Metric: 21 Changes from 0.25 to 7 MM Feeds: 40 Changes from .0010 to .0250 IPR Feeds in Metric: 40 Changes from .0250 to 3.5 MM Main motor: 220/440 Volt Electricals: 7.5 HP Approx. Weight: 5,000 Lbs. Approx. Dimensions: 98” L x 33” W x 50”H Complete with: • 10” 3 Jaw Chuck • 12” 4 Jaw Chuck • Hardened Ways • Tool Block * 1 Holder • Coolant Pump, Spigot & Nozzle, all updated OEM Items • Chip Pan, Built into Casting Frame Type Condition: Runs Very Well. Great Toolroom Lathe. Inventory No: 6844 </video> <video> Kearney & Trecker Vert mill, mdl, 315 S-15, Inspection/Demo. Video after New 4 axis DRO Installed Description: MACHINERY CONSULTANTS INC BILL WILSON JR. TECHNICAL SALES MGR. 1390 W. 200 S. Salt Lake City, UT 84104 Ph: 801-531-9500 Fx: 801-531-9555 Em: mci@machineryconsultants.com www.machineryconsultants.com Pre-Owned Kearney & Trecker Vertical Milling Machine Model: 315 S-15 / Serial No: 5474011 / User Friendly Rigid Milling Machine / in Utah Showroom / Testing Showing After 4 axis DRO Installation ** Item was recently released from the Standby storage ** General specifications are approximate and are subject to verification. Kearney & Trecker Model, 315 S-15, Inspection/Demo. Video after New 4 axis DRO Installation ** Item was recently released from the Standby storage ** General specifications are approximate and are subject to verification. Table Working Surface: 15” x 68” Longitudinal Travel: 36” Cross Travel: 15” Knee Travel: 18” Vertical travel of head on column: from ½” to 10” ( up to 13” max) Head Travel: adjustable w/upper & lower stops from ½” to 10” max is 13” Spindle Taper: # 50 NST Spindle Speeds: 24 changes 25 to 2000 RPM Saddle width: 21” lower/ 30” under table area, Heavy Pattern design Feeds: table, (built in power feed) 32 changes 3/8 to 90 IPR Main Drive Motor: 15 HP Electricals: 220/440 Volts, (3 phase) Note: Its Currently at 440 volts Voltage Note: Note: Its Currently at 440 volts Approx. Weight: 11,500 Lbs. Approx. Dimensions: 88” L x 84” W x 82”H Shown on Milling machine Package: • The “S” model K & Mill, is the newest machine offered, this is the 2000 RPM spindle mill • Newall 4 Axis DRO Unit, installed on the machine at this time, Table & cross axis, Knee Axis & Vertical Head Axis also, all Pre-Installed-Demo • Has the Sliding dial type pre-select Screws for Height adjustment on head on column • 4 Way power feeds, & full 4 way Power rapid traverse “PRT” • Coolant System, Full system with Loc-Line, Spigot, & Gusher Pump, Wet base built in, all cleaned out & sanitized • External Oiling system, for forced Full Body Oil-Lubrication • Internal Lube standard / sight glasses are highly visible • Side Controls on left side** •Owners Manuals, any avail. Electrical Schematic, All K & T Books • Super clean electrical Cabinet, USA made Electrics, common/popular items </video> <video> Summit Lathe w/Inch & Metric Capabilities, Model 20X80B, SN 33408 ~ demo & Inspection video Description: MACHINERY CONSULTANTS INC 1390 W. 200 S. Salt Lake City, UT 84104 Ph: 801-531-9500 Fx: 801-531-9555 Em: mci@machineryconsultants.com www.machineryconsultants.com Pre-Owned Summit Machine Tool Mfg. company / super Clean !! Mfg. New in the Late 90’s / Really a Popular Deigned Machine SUMMIT 20" x 80" B Lathe, X 4 1/8” Spindle Bore Thru-Hole Toolroom Lathe with built in inch / metric Capabilities: Model Summit 20X80B / Serial No 33408 General specifications are approximate and are subject to verification. Main Specifications Below: Swing over bed: 20 ¼” Swing over slide: 11 7/8” Max center distance: 80” Swing over the Gap: approximately 27 5/8” Length of gap: 15” Length of gap in front of faceplate: 8 3/8” ( extending outwards from face of spindle ) Spindle nose: D-1-8 Camlock HEADSTOCK: Hole thru spindle 4-1/8" (105mm) Spindle bore: (to clear 4” Stock) 4 1/8” ( Large thru hole for it’s a D-1-8 spindle Taper) Taper of Headstock’s Spindle bore: # 6 Morse Taper in headstock Spindle speeds: (15 changes) 14 to 1400 RPM Tailstock Taper# 5 Morse taper in tailstock ( 6 ½” travel of spindle ) Tailstock travel of spindle Barrel 9 ½” Width of bed: 16” Threads: in inch (64 changes) ¼” to 60 TPI – (threads Per Inch) Threads: Metric (64 changes) 0.5 - 120 MM – (MM Per Rev) Feeds: in inch (36 changes) 0.0015 - 0.040 IPR ( Inches Per Rev) Feeds: in Metric (36 changes) 0.125 – 30 MM per revolution in Speed of Feed, Main motor: 10 HP / 7.5 K.W. Electricals: 220/440 Volt ( it’s currently at 440 volts 3 phase ) Approx. Weight: 5,400 Lbs. Approx. Dimensions: 51” Height x 136” length x 50” width (front to back) Condition: Runs Well, machine is equipped with basic tooling items, The machine came to us from a Satellite Food Maintenance Facility, Limited Use & V. well maintained 4.150” Hole in spindle Bore: D-1-8 Camlock Spindle Taper, Inch & Metric Threading & Feeds, both threads are standard, Spindle speeds up to 1400 RPM, 10 HP Main drive motor & electrics are set up from Facility @ 440 Volts now ( 220/440 Volts) •Steady Rest body & frame & base clamp, 3.5" to 8" Hole opening, with the 3 Spindle-Brass tips in the 3 spindle •Heavy patterned type Bed Ways, Hardened & ground inserted ways 44-48 Rockwell C • wide Carriage & saddle, One Piece Cast-Iron base & Rigid • Chip Pan, removable type, Rear Splash Guard, Hardened-Ways are the Induction Hardened Bed-Ways, heavy pattern frame with a user-friendly Footprint & design-layout for operations. • 12” 3 jaw chuck, D-1-8 direct mount type, “the one on it now” it’s a superior quality-Import • 12” 4 jaw chuck, D-1-8 direct mount type, New in the Box, 1-Piece Top Jaw style (all chucks are set up for 4.3” minimum thru hole, to not knock down on spindle’s 4” bore) • Wedge style quick change tool Post Package, Good in stock on shelf in Ut. • Model: CA-Set, To Include: 1 Each Wedge-type- Q.C. Tool Post & 5 each tool holders, #1, #2, #4, #7, # 10 • (Additional holders as needed, available for around upon request) • New Halogen – Long-Arm Work-light, 110 Volts, corded with L-Bracket • Coolant Pump, Coolant Tank, Hose, spigot & Nozzle, complete unit sold in as is working order. • Owners-Manual, 2 books, One operations & the other is Maintenance & Views & diagrams. Common Wear Parts are also available </video> <video> Monarch Lathe Really a Sweet Run Demo Model CBB 18, 21" x 96" S/N 26900 Description: Bill Jr., Technical Sales Manager, Director of Operations 1390 West 200 South Salt Lake City, Utah 84104 Office Phone 801-531-9500 Office Fax 801-531-9555 E Mail for mci@machineryconsultants.com Our website: www.machineryconsultants.com Pre-Owned Monarch Lathe, Heavy Pattern, Rugged Frame Type Monarch Lathe - Model CBB 18, S/N 26900, size @ 20.5” X 96” General specifications are approximate and are subject to verification. Swing over bed: 20.5” ( actual swing is shown on the Monarch Tag on HS ) Swing over slide: 12.5” Max center distance: 96” Spindle nose: D-1-6 Camlock Spindle bore: 1.685” (larger than 1 5/8”) Spindle speeds: 16 Speed Change = Ranging From 12 & going up 487 RPM Tailstock Taper: #4 MT Width of bed: 19” Wide, Outer Way to Way, Heavy pattern Design, Width of Carriage 32” wide on front area Threads: 48 Changes 1 ½ to 92 TPI Feeds: 48 Changes .0038 to .0.240 IPR Main motor: 10 HP main drive motor, USA Made Electricals: 220/440 Volts, dual voltage Approx. Weight: 6,500 lbs. to 8,500 Lbs ( approximate ) Approx. Dimensions:160” Length (= 13’ 4” ) Length X 48” wide X 64” Height Complete with: • 18” 4 Jaw Chuck- Heavy Duty, Skinner USA -Direct Mount (D-1-6 Camlock-Taper) Skinner chuck has a stamp w/part # of 1918-D6-Skinner, USA Made Chuck in good shape • Steady Rest, Heavy Patterned type, Max Hole opening up to 6.5” dia. Roller bearing design, • 1 each #4 mt Live center, Owners Manuals Set, • Aloris CXA Tool Post with Mics Holders with it (seen in pics) • low pattern design for easier clean out & chip removal • Flame Hardened Ways exclusively done by Monarch Factory in Mfg Condition: Runs Well. Heavy Duty Lathe. Superb overall Condition Just released from US Navy / stamps on Headstock still, really limited use & well maintained. </video>

Contacts and Links

Description

OFFERING PRE-OWNED METALWORKING MACHINES WITH VERY LIMITED USE SINCE 1963
MACHINES ARE AVAILABLE FOR INSPECTION AT OUR FACILITY, LOCATED 5 MINUTES FROM THE SLC UTAH INTL AIRPORT

* FOCUSING ON ENGINE LATHES * MILLING MACHINES, BORING MACHINES * RADIAL DRILLS * BANDSAWS * SHEARS * ETC

* * WE ALSO SELL & SERVICE THE NEW MACHINERY, FOCUSING ON LATHES, MILLING MACHINES, BANDSAWS, DRO, PWR FEEDS, & PARTS

Machinery Consultants Inc.
1390 West 200 East Salt Lake City, UT 84104
Office Ph: 801-531-9500 Fax: 801-531-9555
Email: mci@machineryconsultants.com
Website: www.machineryconsultants.com

Videos from channel